The continuous development of industry will drive the development of some other industries. Our handcraft is one of them. The development in the industry is still relatively OK. So what are the relevant conditions for handling handcraft? Let's make up a small group of Jinan handicraft factory to talk about it for us!

　　手板完成后，如果需要噴漆處理，需要注意，SLA激光成型的工件不適合表面高光處理，因為SLA用的材料是一種光敏樹脂，手板廠對油漆的粘附性不是太好。光澤度達不到太好的效果。

　　After the completion of the hand board, if painting treatment is needed, it should be noted that SLA laser formed workpieces are not suitable for high gloss surface treatment, because the material used in SLA is a kind of photosensitive resin, and the adhesion of the hand board factory to the paint is not very good. The gloss is not very good.

　　CNC加工的工件，其中有PP，POM材料，不適合表面做噴漆處理，材料不具有和油漆的粘附性。 手板廠在噴漆之前要進行砂紙打磨，砂紙分幾種類型，有粗砂紙、有細砂紙。可將工件邊沾水邊打磨。用細的砂紙打磨。然后就可以噴砂，噴底灰了。如果表面是高光處理，還需打磨的更精細，然后再噴一層底漆進行打磨。

　　Parts processed by CNC, including PP and POM materials, are not suitable for surface painting treatment, and the materials do not have adhesion with paint. Before painting, the hand board factory should carry out sandpaper grinding. There are several types of sandpaper, including coarse sandpaper and fine sandpaper. The workpiece can be polished while stained with water. Grind with fine sandpaper. Then you can sandblast and spray the bottom ash. If the surface is high gloss, it needs to be polished more finely, and then spray a layer of primer for grinding.
                 

　　根據具體生產現場的條件及處理工件表面狀況不同，而采取的物理手段，其主要目的是化學處理中影響處理質量和周期的控制因素，維護化學制劑的使用壽命。如：對于被處理新產品表面過多的油污、灰塵、鐵屑、塊銹、浮銹及過厚的氧化皮和不能酸洗的產品進行人工擦洗和去除（主要采用鋼絲刷和砂布），處理后用壓縮空氣銹塵。

　　According to the specific production site conditions and different surface conditions of the workpiece, the main purpose of the physical means is to eliminate the control factors affecting the treatment quality and cycle in chemical treatment, and maintain the service life of chemical agents. For example, for the treated new products, excessive oil, dust, iron filings, block rust, floating rust, excessive oxide scale and products that cannot be pickled are manually scrubbed and removed (mainly using wire brush and abrasive cloth), and then the rust dust is removed by compressed air after treatment.

　　手板廠減少除油除銹液的大量損耗，避免工件過處理造成的損耗，縮短化學處理周期，提高處理液的使用壽命，預處理除油應用充分稀釋的除油劑進行擦洗，嚴禁使用有機溶劑（如汽油、香蕉水）以避免污染除油槽液及時性表面形成有機溶劑固體份保護膜影響除油質量。

　　The handcraft factory can reduce the loss of oil and rust removal fluid, avoid the loss caused by over treatment of workpieces, shorten the chemical treatment cycle, and improve the service life of the treatment fluid. The pretreatment degreasing should be scrubbed with fully diluted degreasing agent. It is strictly prohibited to use organic solvents (such as gasoline and banana water) to avoid polluting the deoiling tank liquid and forming organic solvent solid protective film on the timely surface Quality.

　　以上就是濟南手板廠的小編給大家講解的處理手板時要相關條件是什么，希望能幫助到大家。若想了解更多，請咨詢關注我們網站。

　　The above is the Jinan hand board factory's small make-up to explain to you when processing the hand board what the relevant conditions are, hoping to help you. If you want to know more, please contact our website.